Support for the DIY speaker builder

Topic Author
Posts: 1
Joined: Wed Sep 20, 2017 1:39 am

Jeff Bagby Mandolin - phase response

Wed Sep 20, 2017 1:44 am

Hi there,

I have one question about Mandolin speaker project.

As we can see from Jeff write-up ( ) frequency response is realy nice, flat, but nowhere I didnt find the driver's phase response. Whether that response can be found, whether Jeff showed it somewhere? If someone measured the Mandoline, can show reverse null response?


Jeff B.
Posts: 55
Joined: Mon Feb 20, 2012 8:40 pm
Location: Kokomo, Indiana

Re: Jeff Bagby Mandolin - phase response

Sun Oct 22, 2017 8:07 pm

I don't have a pic handy, that speaker was done quite some time ago. But the crossover in the Mandolin is an acoustic LR4 type with good phase tracking. Both drivers are in phase with each other at the crossover, so yes there would be a reverse null. (Having a reverse null is not always important, but there is one in this case).
Jeff's Excel Loudspeaker Design Software

Who is online

Users browsing this forum: Jeff B. and 1 guest