Support for the DIY speaker builder

 
uglywoofer
Topic Author
Posts: 2
Joined: Sun Dec 29, 2013 6:11 pm

series parallel connection

Sun Dec 29, 2013 6:19 pm

Let me first say that winpcd is outstanding and you deserve a huge thank you from the community. My question has to do with series connection of mids or woofers- I don't see a way to change the connection. Maybe I'm just blind and someone can point me to it. Thanks
 
User avatar
dlr
Posts: 91
Joined: Thu Feb 21, 2013 1:16 am
Location: Canton, MA
Contact:

Re: series parallel connection

Sat Feb 15, 2014 10:50 am

I overlooked your thread start as well as gowa's. Sorry for this.

I'm not quite sure of your question. The two parts implemented are for standard parallel connections. If you use two woofers or two mids, they are connected in parallel, not series.

Dave
 
uglywoofer
Topic Author
Posts: 2
Joined: Sun Dec 29, 2013 6:11 pm

Re: series parallel connection

Sat Feb 15, 2014 7:47 pm

thanks for the reply, Is there any plan in the future to make a series connection possible-such as an mtm with two 4 ohm woofers in series?
 
User avatar
dlr
Posts: 91
Joined: Thu Feb 21, 2013 1:16 am
Location: Canton, MA
Contact:

Re: series parallel connection

Sat Feb 15, 2014 9:19 pm

I had not thought to add this. You can do this now by taking measurements of the drivers when combined in series and entering that as a single driver. This does make the spatial option unusable.

I'll look into it. It can be done, I'm not sure how much it will take to do that, but a quick look into the code makes me think it may not be too difficult. I can't say when I might get to this. If it looks like a short bit of time, I may do it soon. I can't say more than that for now.

Dave
 
User avatar
dlr
Posts: 91
Joined: Thu Feb 21, 2013 1:16 am
Location: Canton, MA
Contact:

Re: series parallel connection

Thu May 22, 2014 9:35 am

In case you're subscribed to this thread for email notification, there are some new changes (v1.3) that include being able to switch midrange or woofer connections series/parallel. Just to be sure, this is only the connection of a driver pair, it has nothing to do with series crossovers.

Dave

Who is online

Users browsing this forum: No registered users and 2 guests