The tweeter is the venerable XT25BG60, double magnet version for added sensitivity (which I will need).
The two mids are Zaph's ZA14W08, well know high performance midrange that I've yet to use. It also sticks to the silver cone style of the MCMs.
The four midwoofers are MCM 55-2669, great cone great midbass. Should knock it out in this zone and rock the room well.
The four woofers are 4 ohm DIY Sound Group Anarchys, which well, yea. Nice.
The four Anarchys are capable of linear output of 118db at 1M down to 30 hz with 500 watts input. Just consider that. Consider it.
My estimates show a voltage sensitivity for the Anarchys of just under 94db @1M, and I'll guess that'll set total system voltage sensitivity at about 89db or so after baffle compensation. That seems like a nice place to be. My Europower 2500 can push clean 600 watts into a 4 ohm load, so I imagine reaching the limit is actually possible (though it would never happen) in my home setting.
The box is where it will get interesting. 6 feet tall, 9" wide, 12" deep. Modular. Bottom box 33" tall, same as top box. Tweeter box in between 6" tall. Not sure how it will lock together yet, and it will need a stand system to be stable I am sure.
Its coming together. Be afraid, be very afraid.
