For those of you who have built Stances from the Kit...

Ask questions - discuss speaker building, testing, and related topics
Post Reply
User avatar
Wolf
Posts: 183
Joined: Mon Feb 20, 2012 7:36 pm
Location: Indiana
Contact:
Contact Wolf

For those of you who have built Stances from the Kit...

Post by Wolf » Tue Oct 21, 2014 3:14 am

For those of you that may have built these from the Meniscus kit and used the 'layout' of the xover that was supplied, I am sadly informing you that it is incorrect.
The coil and cap positions are not where they should be. It should be 'resistor- cap- shunt coil', not 'resistor- shunt coil- cap'. They have been notified of this error. I'm sure Mark will rectify this issue.

This will make a big difference in the sound. Thank you Soundseeker for bringing this to my attention.

This is the correct schematic:
Image

Sorry for any issues this may have caused,
Wolf

EDIT: Stance album of photos is here:
http://s18.photobucket.com/user/wolf_te ... t=3&page=1
Image
Top
Post Reply

Return to “General Speaker Building”